PermaRoof’s RubberCover EPDM roof kit contains everything you need to replace your flat roof covering. High performance, standard grade (1.14mm) EPDM membrane, hand-cut to size to suit your project needs – trade or DIY.
Perfect for garage roofs, garden offices and flat roof extensions. Enter your dimensions and we do the rest. Order online today for fast delivery across the UK. (Minimum size 8m2).
Please specify your preferred trim colour in the box above. Trim is available in three colours to suit your projects:
The standard grade (1.14mm) Elevate RubberCover EPDM roof kit is suitable for all types of domestic flat roofing. It is also available in premium grade (1.52mm) for heavy duty installations or green roofing projects.
Permaroof also stock a range of rubber roof kits in off-the-shelf-sizes from 6’ x 4’:
Your Permaroof EPDM roof kit will be tailored to the include the correct quantities for your project specifications. We do all the calculations for adhesive, sealant and trim, so you don’t have to.
It is important to read the notes below before you enter your roof sizes.
For some projects, such as those with adjoining brickwork, extrusions (flue pipes, drain outlets or corner detailing) additional materials may be required:
Applied in a single sheet, EPDM roofing membrane installation results in fewer seams and reduced installation time. Cold applied using water-based and bonding adhesives. Safe, fast and easy to apply.
Unmatched resistance to ozone and UV radiation. 100% water resistant over the long term. Proven worldwide high performance in a range of locations and climates. Life expectancy of more than 50 years.
Remains flexible at extreme temperatures and maintains UV stability. Elongation is possible to more than 300% to accommodate significant building movement and temperature fluctuations.
Requires little or no maintenance over the lifespan. Suitable for DIY application and reduces professional installation time. RubberCover EPDM is a long-term flat roof waterproofing solution with a low life cycle cost.
Limited environmental impact during the manufacturing process and throughout use. Fully recyclable.
Permaroof can custom-build your flat roof kits up to 15.24m x 30m with one single-ply membrane. We calculate and tailor your kit to suit your exact needs with sufficient materials to get the job done – no waste, no fuss.
The award winning Permaroof sales and customer support teams are on hand should you need help with your order on 01773 441 947.
Contact our team to discuss setting up your trade account. Benefit from preferential pricing, a dedicated account manager, samples and marketing materials and much more. Give us a call now on 01773 441 947.
Both preparation and installation of Elevate rubber roof kits are important to ensure the best performance from your project. The Permaroof teams are happy to advise. Call us on 01773 441 947 during working hours or use the live chat facility. We can also connect you with a trained EPDM installer if you decide DIY isn’t for you.
Preparation is one of the most important stages of the installation. Ensure the surface is free from debris, dirt and dust and is in good condition. Correct preparation is essential to ensure both successful application of the EPDM membrane and long-term performance.
Lay out the EPDM membrane over the surface area of your roof allowing for the correct overhang. Allow the membrane to rest for around 30 minutes to allow packing creases to dissipate.
Fold the EPDM back to expose around half of the roof.
If you have the Permaroof spray adhesive, spray an even coat across both the membrane and the exposed roof deck. If you’re using the roller to apply water-based bonding adhesive to the substrate, apply an even coat.
Roll the membrane into the adhesive and remove trapped air or wrinkles by smoothing with a soft bristle broom or brush.
Trim excess membrane, leaving approx. 50mm overhang.
Full installation instructions are provided within your EPDM roof kits (online).
To find more installation guides, please visit the Permaroof resource library here.
Permaroof UK Ltd also have an extensive video library containing installation tutorials, EPDM detailing demonstrations and products information.
Visit the Permaroof video library here.