DOUBLE GARAGE ROOF KIT (6.4M X 7.4M)

Complete EPDM Double Garage Roof Kit (6.4m x 7.4m)

Replace your garage roof fast with high performance EPDM in a complete kit from PermaRoof UK. Contains everything you need, easy to fit, ideal for DIY.

• Perfect for DIY, fast and easy to install
• Complete kit including edge trim
• Ideal for green roof projects

Specifications:

• Standard size includes overhang (suitable for 6m x 7m double garage)
• Thickness 1.14mm
• Weight 1.4kg per m2

Contents:

• RubberCover EPDM membrane (6.4m x 7.4m)
• 12.5L PermaRoof deck adhesive
• 2 x Spray Contact Adhesive (750ml aerosol)
• PermaRoof Bond and Seal Sealant
• 3 x 2.5m two-part gutter trim
• 6 x 3.5m edge trim
• 3 x joint clip
• 4 x external corners
• 2 x end caps
• 3 x closed cell foam tape
• 1 x pack poly pins (40mm)

In this kit we have ensured that the piece of rubber exceeds the size of your garage roof to allow for the necessary overhang. If you require additional trims and adhesive these can be purchased in our online shop.

Important Information – please read before you place your order:

This double garage roof kit is tailored to be suitable for a 6m x 7m garage roof and includes the correct quantities for this project specification. We have included the additional membrane to allow for the necessary overhang. We do all the calculations for adhesive, sealant and trim, so you don’t have to.

Trim colours:

Please note that the colour option applies to the trim only and the membrane is a standard grey/black. Specify your preferred trim colour in the box above. Trim is available in three colours to suit your projects:

• Black
• White
• Anthracite Grey

Trim options:

PermaRoof’s roof kits contain sufficient gutter trim for one long side of your roof. If you require gutter for the short side of your roof instead, please email us after you have placed your order at [email protected], quoting your order reference number.

Additional materials:

Some garage roofing projects may require additional materials or accessories to complete joins to brickwork, allow for a drain or to handle extrusions:

• Pipe Detail - Quickseam pipe flashing
• Corner or Skylight Detail - Quickprime Plus & 9" Formflash
• Termination to Brickwork - Metal Wall Flashing
• Internal Drain - EPDM Drain Outlet

Tools required:

Just a few tools are needed to install your roof kit:

• Soft-bristled household broom
• Adhesive rollers (large 9” and small 4” rollers recommended)
• Sharp scissors
• Penny roller for EPDM detailing
• Seam or edge roller

We stock a wide range of installation essentials, specially selected for installing EPDM.

Options Available

Standard grade (1.14mm) EPDM membrane is ideal for medium-scale re-roofing projects and is fast and easy to fit to a standard double garage roof. We also provide a custom-cutting service and can build flat roof kits in premium grade EPDM to your exact specifications, in addition to a range of standard, off-the-shelf sizes.

• Shed roof kits
• Single garage roof kit (6.4m x 3.9m)
• Build your own flat roof kit (8m2 up to 15.24m x 60m)

Product Features

All our roof kits are designed to help you get the job done fast and right first time. We include everything you need from the deck up. A complete kit ensures the correct quantities with no fuss and no waste or risk of underbuying.
  
Easy to fit, ideal for DIY

RubberCover EPDM membrane is designed to be fast and easy to fit to a well-prepared substrate.  Applied in a single piece, there are no seams to handle, and few tools are needed, making it the ideal system for a competent DIYer.

High performance

This type of single-ply rubber membrane offers unmatched reliability and high performance, tested all over the world in a range of climates. Highly flexible and resistant to UV and ozone, it compensates for building movement and can elongate up to 300%. PermaRoof garage roof kits contain RubberCover EPDM as standard.

Superior longevity

RubberCover EPDM membrane carry an estimated service life of over 50 years, based on proven performance in the field. This longevity can mean a much lower cost vs. value ratio than many other roofing systems on the market. It also reduces the environmental impact by reducing waste over the long term and is fully recyclable upon removal.

Low-to-no maintenance

Installing EPDM on a garage roof is a low-to-no maintenance option. It is advisable to remove large debris, such as fallen branches, from the surface of the EPDM and visually inspect it bi-annually and following a storm. Extremely durable and hard to damage, but easy to repair if necessary.

Customer Service and Delivery

• Orders placed before 12pm will be processed the same day for fast delivery (Mainland UK).
• Collection available from Alfreton, Derby by appointment.
• For further product information or after sales service please contact our friendly team by phone, email or chat.

Trade Customers

Contact our team to discuss setting up your trade account. Benefit from preferential pricing, a dedicated account manager, samples and marketing materials and much more. Give us a call now on 01773 441 947.

Installing your garage roof kit

Your double garage roof kit is fast and straightforward to install with no experience needed. Full instructions are included, and we offer exceptional customer support from our award winning sales teams.

Please note: Careful preparation of the roof deck and correct installation of roof kits are equally important to ensure you get the full and best performance from your EPDM system. Always follow the installation guides.
 
We also provide full access to a wide range of free resources to help with preparation and installation of your kit.

Useful guides available for reference:

• Roof Preparation
• Permaroof Trim Guide
• Application of EPDM Guide
• Rubber Roofing FAQ's
• And many more.

To find these and many more useful EPDM installation guides, please visit the resource library here. Visit the video library to find step-by-step EPDM installation tutorials and product information here.

The PermaRoof teams are happy to give expert advice, should you need it. Call us during working hours or use the live chat facility for a fast query. We can also connect you with a trained EPDM installer if you decide DIY isn’t for you.