Improved ELEVATE bonding adhesive (BA-2021) is designed for use with RubberCover™ and RubberGard™ EPDM roofing systems. Available in three sizes 2.5l, 5l and 10l tubs with coverage rates up to 30m2. Can be applied using a roller, SuperSpreader or sprayer (sold separately).
Typical Elevate high performance with coverage rates of up to 3m2 per litre. Developed specifically for use with Elevate RubberCover and RubberGard EPDM. Fast, safe and easy to apply and suitable for a range of surfaces.
The new formula bonding adhesive offers improved coverage with greater fluidity and higher solid content than in other roofing adhesives. Ideal for both DIY and trade roofing projects. Applied with a roller, spray adhesives also available.
Product code: FSBA2012
Wet applied
Elevate EPDM roofing systems carry a life expectancy of more than 50 years. It makes sense to apply these membranes with a high-quality adhesive that will match this unique performance. Elevate bonding adhesive has been developed especially for EPDM membranes and accessories and delivers the quality you need for a long-lasting, reliable roofing project. For bonding onto timber or OSB roof decks, water-based bonding adhesive is ideal.
Store in original containers at temperatures between 15-25 degrees. Keep from freezing. When stored correctly, you can expect a shelf life of approximately 18 months.
May cause mild transient eye irritation. Avoid contact with eyes, skin and clothing. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If consumed, seek immediate medical attention. Keep container closed when not in use. Keep out of the reach of children.
Contact our team to discuss setting up your trade account. Benefit from preferential pricing, a dedicated account manager, samples and marketing materials and much more. Give us a call now on 01773 441 947.
Correct preparation of the roof surface and application of the adhesive is important to ensure the best performance from your project over the duration of its long-expected lifespan.
Bonding surfaces must be clean, dry, smooth, free of sharp edges, loose and foreign materials. Brush down the area first and use a suitable cleaning medium to remove oil, grease stains and any other contaminants.
Lay the membrane out over the working area and leave to rest for 30 minutes.
Stir the adhesive thoroughly before use. Use only when temperatures will not fall below freezing at any time during a 24-hour period following the application of the EPDM.
Work in manageable sections and apply bonding adhesive over the substrate and apply to the underside of the membrane with a solvent resistant roller. Take care to coat the substrate and membrane evenly to avoid globs and puddles of adhesive.
Use a 4” mini roller for detailed application and a 9” solvent resistant roller for the main area application. PermaRoof stocks a range of suitable rollers, especially selected for application of our roofing adhesives range.
Wait for the surface to become tacky to the touch, then carefully and evenly roll the membrane in place over the substrate. To ensure proper adhesion, compress the bonded portion of the sheet to the substrate with a wide broom to remove any bubbles or small creases.
Note that the quantity and type you need will vary according to your project dimensions and requirements. The PermaRoof teams are experienced in EPDM roofing and are happy to advise. Call us on 01773 441 947. Product data sheets and application guides can be found in the Permaroof corporate resource library here.