FIRESTONE RPF STRIP PLM
QuickSeam Reinforced Perimeter Fastening Strip
Firestone’s QuickSeam Reinforced Perimeter Fastening Strip is a 152 mm (6”) wide, non-dusted strip of RubberGard MAX Reinforced EPDM membrane with a 76 mm (3”) wide QuickSeam tape factory laminated to it along one edge. The strip is used for non-penetrating base tie-ins as described in the Firestone specifications.
The substrate needs to be clean, smooth, dry and free of sharp edges, loose or foreign materials, oil, grease and other materials that may damage the material.
Restore to room temperature prior to use, if exposed to temperatures below 15°C for prolonged periods.
Unroll the QuickSeam Reinforced Perimeter Fastening Strip (QSRPF Strip) with the release paper up and the tape portion furthest away from the wall or penetration. Once the strip lies flat, fasten it to the substrate with Firestone Batten Strips or approved plates and fasteners (max. 300 mm o.c.) and complete the base tie-in detail as per Firestone specifications and details.
In accordance with length of tie-in detail.
Packaging / Storage / Shelf Life
Packaging: 30.5 m (100’) rolls, 2 rolls per carton.
Note: QuickScrubber and/or QuickScrubber Plus pads and handles are included in each carton. Quantities vary depending on the QuickSeam product.
Storage: Store in original unopened containers at temperatures between 15°C and 25°C. Keep the material out of direct sunlight until ready for application.
Shelf Life: 12 months can be expected if stored in above-mentioned conditions. Shelf life information is only a recommendation and not a fact of life. The real expiration date highly depends on the history of storage and handling of the accessories. Quality and applicability should thus always be verified: QuickSeam RPF Strip can be used only as long as the release paper can easily be removed from the tape without tearing the paper apart.
Refer to Material Safety Data Sheets.