Quickseam Corner Flashing
Quickseam Corner Flashing is a 216 mm in diameter round piece of uncured EPDM factory laminated to QuickSeam Tape. It is designed to flash outside corners or to be used as a cover patch for repairs where appropriate.
EPDM surfaces and/or mating surfaces must be prepared with QuickPrime Plus, using a QuickScrubber tool. Use of other products is not allowed. Restore the product to room temperature prior to use if exposed to temperatures below 15ÂșC for prolonged periods.
On cold days with ambient temperature below 5ÂșC, the use of a heat gun is recommended to warm the Quickseam Corner Flashing and to ensure good formability. On normal days, preheating of the product is not necessary.
One piece per corner.
See an example of quickseam corner flashing being used HERE
This product must be used with Quickprime Plus, and applied using a Quickscrubber Pad & Handle.